Primitive Racing OUTBACK Winch Mount:
WARN VRX 45-S Winch:
WARN AXON 5500-S:
Mounting the mount to the car is very straightforward, you just remove the front bumper skin and bumper beam and replace the bumper beam with the winch mount. The winch also very easily mounts to our mount, it bolts right on with hardware included from superwinch. The Hawse or Fairlead ( Anodized Aluminum Piece) that comes with the winch mounts easily to our mount with hardware we supply.
**the trickiest or most daunting part of the installation is cutting the hole in the bumper skin**
We provide you with pointed markers that attach to the mount while in place on the vehicle that give you two reference points to use to apply the cut-out template we provide with the mount. You'll need a dremel tool or similar and a steady hand to perform the cut.
The Winch comes from manufacturer with wiring instructions and all of the wiring supplies needed to hook it up and use it. Use care to wire safely. We generally mount the rocker switch near the battery under the hood, and the remote control outlet into the front bumper skin (or hidden under the hood).
Don't see what you need? Need something else or have a question about the product? Give us a call at 503-624-2139 or email at firstname.lastname@example.org
|Made by PRIMITIVE proudly in the USA||Yes|
|Installation Instructions Included||Yes|
|Bolts to Existing Threaded Holes in The Body||Yes|
No RSS feed added