3/16" Trans Plate
Comes in 3/16" Aluminum, stout and vented
Bolts directly under the transmission area straight to the frame of the car giving the best protection possible!
No drilling or cutting of any kind required. Direct bolt on unit!
For rugged protection of the transmission area on a 2013-2017 Crosstrek and 2014-2018 Forester. We now offer the tough, 3/16" Aluminum Primitive MID-ARMOR. This skidplate bolts on with the hardware pack that we provide, and covers the middle portion of your car and will protect the transmission, whether you are rocking a CVT, a 5MT or even the 6MT manual trans. Bolts on in minutes, no drilling required.
Remember, when you put 2 skidplates into your cart you will automatically get a 10% discount (FBA, Full Body Armor discoutn) shown in cart upon checkout, and if you get 3 or more skidplates (like front, mid, and rear) you will see our 15% triple armor discount automatically.
Don't see what you need? Need something else or have a question about the product? Give us a call at 503-624-2139 or email at firstname.lastname@example.org
|Made by PRIMITIVE proudly in the USA||Yes|
|Installation Instructions Included||Yes|
|Bolts to Existing Threaded Holes in The Body||Yes|
Hi 2006 Outback 25i owner, 2″ of lift is not too realistic for that car. We find frequent front CV axle failures for cars lifted 1.5″ or more. The CV angles become too great and the CV’s are already old. WHEN you do replace the front CV axles, only get the factory REMANUFACTURED ones from […]
” The setup is fantastic Paul, it feels like a totally different car. Thanks so much for the guidance and help. Regards, -Ben ” Ben ordered KYB struts (with up-rated rear struts) and paired with the King Raised Springs on his ’06 OBXT and appears to love it.
” Hey, I just wanted to say that I received the kit and got everything installed. Everything was spot-on and fit up perfectly. I loved how each different stage of the install had its own separate set of instructions, parts list, and photos. It was really nice to never second guess which hardware to use […]
From: “Chris” Re: King STD height springs and Koni Shocks – 2008 WRX HOLY CRAP! I am so unbelievably impressed with them. They feel great for the 4 days worth of driving I have on them now. The suspension feels more articulate and I am fully pleased with the front and rear spring rate. The ride […]
“Joe” wrote: Paul– I have been driving on the new suspension setup more than two months and I have to tell you that I am very glad that I made the purchase of the raised height King Springs and that I got the alternative KYB struts for the rear of my 2008 Outback. I did […]