Primitive has developed a low cost series of rugged spacers to provide inexpensive lift to virtually any Subaru. From just lifting the tail to get rid of the dreaded "saggy butt" to a full lift to help maximize clearance. Add a set to your king spring order to get the most lift for your off-road adventures! Made from black, high density polyethylene, the spacers were computer designed and are cut on a large waterjet machine. They conform to the shape of your fender well and absorb shocks better than an aluminum spacer.
These provide easy lift (positioned under your strut top) but avoid all the problems associated with huge lifts (premature CV Joint failure, steering linkage lengthening, spacer blocks for transmission, extended linkages and brake lines, etc)
They come with proper length, strong, grade 10.9 replacement hardware which will replace the factory studs that you will knock out of your strut tops.
Don't see what you need? Need something else or have a question about the product? Give us a call at 503-624-2139 or email at email@example.com
|Extremely Rugged||Yes, made from High Density PolyEthylene|
|Made by PRIMITIVE proudly in the USA||Yep|
|Hardware Included||Yes, all proper 10.9 grade longer hardware needed, including top nuts|
|Installation Instructions Included||Yes, with the hardware|
|Bolts to Existing Threaded Holes in The Body||Yes|
|Simple Installation||Not too bad, but you do knock out the studs from strut tops|
We sell a lot of lightbars, lightpods, and brushbars. And I get asked all the time for: “the best lights possible” So I am writing a series of articles on DRIVING LIGHTS to help dispel some myths and shed some light on the many factors that go into choosing the best lights for your needs. […]