Complete Lift kit comes with all the necessary hardware to get the job done right the first time!King Springs Primitive Racing's Rear Subframe Spacer kit. Rear Shock Extensions. Brake line bracket extensions. Primitive Lift spacers (depending on lift height) Choose between 1.1" or 2" lift.
Comes in 3/16" T-5052 Aluminum with louvered vents. Bolts directly under the transmission straight to the frame of the car giving the best protection possible! No drilling or cutting of any kind required. Direct bolt on unit!Here is a video of skidplates in action found at: www.offroadsubaru.com
Comes in 3/16" Aluminum, stout and vented Bolts directly under the transmission area straight to the frame of the car giving the best protection possible! No drilling or cutting of any kind required. Direct bolt on unit!
Choose between the thinner 1/8" or thicker 3/16". Choose if you want the oil drain access hole. Optional Fumoto Valve. Eligible for our "Full Body Armor" and "Triple Armor" discounts when multiple Skidplates are purchased together. Fits 2013-2017 Crosstrek models. Plates are DIFFERENT for 2018 Crosstrek
Primitive Racing "C" shaped pair of Rear Sway Bar End Links. Billet Aluminum with pressed in Heim Joints (teflon lined). Makes your Rear Sway Bar act Instantly with the heim joints! 1993-01 Impreza 2002-2003 Impreza and WRX and 2002-05 Impreza Wagons 1991-1999 Legacy and Outback 1998-2002 Forester
Lightweight Fiberglass RALLY LIGHT POD. Fits four big lamps 6" to 9" Made to fit PIAA 8" rally driving lens. This pod fits the GC Impreza hood and Mitsubishi EVO 7 the best. Will fit other cars as well.
Fumoto Drain Valve 1993-09 Impreza, 1998-2010 Forester, 1993-04 Legacy/Outback all engines and 2005-2016 Legacy/Outback 6 Cylinder models.
Light the way with tiny LED flashlight on your KEY RING!
Complete Lift kit using the up-rated King Springs, Primitive Racing's Lift Spacers, Whiteline Rear Camber Bushings, to get the job done. This kit gets approx 1.5" of Lift. Add a NEW set of KYB struts and get the Up-Graded rear shocks! (see drop down menu) And you can get the struts FULLY ASSEMBLED too!
Fills the gap between the front of the front Skidplate and the back of the front bumper. Eligible for our "Full Body Armor" and "Triple Armor" discounts when purchased with another Skidplate. Fits 2015+ Outback models when used with our front Skidplate.
Getting COLD this winter? Thinking of running the ALCAN WINTER RALLY? You need a good engine heater. Buy the Subaru FACTORY one or this UNIVERSAL FITMENT, magnetic block heater with 6" cord.
Comes in 3/16" thickness. Choose if you want the oil drain access hole. Optional Fumoto Valve. Eligible for our "Full Body Armor" and "Triple Armor" discounts when multiple Skidplates are purchased together. Fits 2015+ WRX.
Full Set Pair of Fronts and Rears for your car that are a HEAVY DUTY, GRAVEL SPEC rally suspension. A significant upgrade over virtually any other struts. Inverted design, bump and rebound adjustable. 50mm shaft!
Replaces front bumper beam. Made from sturdy 3/16" steel plate. Bolts directly to the frame of the car. Hides up to a 4500lb Winch behind bumper skin. Fits 2013-2017 Crosstrek and 2014-2017 Forester. Choose to buy Mount, Winch or Both (recommended).
Billet Aluminum spacers for rear trailing arm bracket.Pair of 50mm (2 inch) thick Rear Trailing Arm Spacers with longer M12 bolts & washers. For: 1998-2008 Forester, 1993-2007 Impreza and 1990-1999 Legacy and Outback with 2 inch or bigger lift.