Ceramic or High Temp Resin H4 Lamp Connector (sold individually--one connector)
Lightweight Fiberglass RALLY LIGHT POD. Fits four big lamps 6" to 9" Made to fit PIAA 8" rally driving lens. This pod fits the GC Impreza hood and Mitsubishi EVO 7 the best. Will fit other cars as well.
Kit contains the slide latch, barrel, rivets to mount to most bodywork
High Technolgy Halogen Driving Lens for use in LIGHT PODS. Contains only a single 8" DRIVING LENS (glass) but no housing or H4 bulb. Made of real steel and real glass (no plastic crap). Made to attach using an 8" light pods mounting ring kit (sold separately). Takes H4 bulbs. Driving, Pencil and Fog patterns available.
High Technolgy Halogen H4 Light Bulbs. Several varieties to best fit your needs. Sold in TWIN PACKS (2 bulbs)
High Technolgy Halogen Driving Lens MOUNTS for use in LIGHT PODS. Contains only a single ring to mount a DRIVING LENS: Driving, Pencil and Fog patterns available.
High Technolgy Halogen H3 Light Bulbs. Several varieties to best fit your needs. Sold in TWIN PACKS (2 bulbs) and SINGLE packs (1 bulb)
Lightweight Fiberglass RALLY LIGHT POD. Fits two big lamps 7" to 9" in the outboard positions, made to fit PIAA 8" rally driving lens and 2 smaller 5" lamps in the center like PIAA 540's. This pod fits the GC and GD Impreza hoods. Smaller center lamps allows more airflow to the TMIC found on many rally cars (Top Mount InterCooler) such as WRX and STi.
High Technolgy 5" Halogen Driving or Fog Lamp. Contains one 5" bare lens to be used with an H3 bulb and our PRIMITIVE aluminum light pod mounting ring kit (sold separately) Made of real steel and real glass in both a DRIVING or an Ion Yellow FOG lens design. Perfect for a night rallycross or for full-on STAGE RALLY in a pod...
Full Set Pair of Fronts and Rears for your car that are a HEAVY DUTY, GRAVEL SPEC rally suspension. A significant upgrade over virtually any other struts. Inverted design, bump and rebound adjustable. 50mm shaft!
Replaces front bumper beam. Made from sturdy 3/16" steel plate. Bolts directly to the frame of the car. Hides up to a 4500lb Winch behind bumper skin. Fits 2013-2017 Crosstrek and 2014-2017 Forester. Choose to buy Mount, Winch or Both (recommended).
Billet Aluminum spacers for rear trailing arm bracket.Pair of 50mm (2 inch) thick Rear Trailing Arm Spacers with longer M12 bolts & washers. For: 1998-2008 Forester, 1993-2007 Impreza and 1990-1999 Legacy and Outback with 2 inch or bigger lift.